TRENDnet TEW-638PAP Router Manual (Setup & Configuration)

There is no better technical help than having the manual of any given product. Fortunately, we are presenting router guide for TRENDnet TEW-638PAP router. If you need help on topics like web panel access for management, router hard reset, parental control settings, band width allocation, changing your router IP or password from default, port forwarding, then reading this guide is a must.

Page 1 / 17
TEW-638PAP
1.01
Quick Installation Guide
Page 2 / 17
Table of Contents
English
1
1. Before You Start
2. Hardware Installation
2
3. Power-over-Ethernet Installation
8
1
Troubleshooting
10
Version 01.08.2010
Page 3 / 17
1. Before You Start
?
?
A computer with a network adapter or wireless adapter properly installed
?
A router with an available network LAN port
?
An available DHCP Server – routers usually have a built-in DHCP server
?
Power over Ethernet (PoE) Switch (e.g. TPE-80WS) (Optional)
?
Injector (e.g. TPE-111GI) (Optional)
Note:
The TEW-638PAP only works with Power over Ethernet (PoE) devices that
follow the IEEE 802.3af standard.
Web Browser: Internet Explorer (6 or higher)
Package Contents
?
?
Multi-Language Quick Installation Guide
?
CD-ROM (Utility and User's Guide)
?
AC Power Adapter (12V DC, 0.5A)
?
Cat. 5 Ethernet Cable (0.6m / 2ft.)
TEW-638PAP
System Requirements
1
Page 4 / 17
2. Hardware Installation
1.
Insert Utility CD-ROM into your computer's
CD-ROM drive.
2.
Click
Run Setup.exe
(Windows 7/Vista only)
2
Note:
1. Locate an optimum location for the Access Point. The best place for the Access Point
is usually at the center of your wireless network.
2. Disable any anti-virus and firewall programs before starting hardware installation.
3. For Power-Over-Ethernet installation instructions, please refer to section
3. Power-Over-Etherent installation
.
For Windows Users
3.
Click
Setup Wizard
.
4.
Click
I accept the terms in the License
Agreement
and then click
Next.
Page 5 / 17
3
5.
Connect the provided RJ-45 cable from a LAN
port on your Router to the LAN port on the
TEW-638PAP.
Then click
Next
.
6.
Connect a RJ-45 cable from a LAN port on your
Router to the Ethernet port on your computer.
8.
Select the TEW-638PAP from the list and then
click
Configure
.
7.
Connect the Power Adapter to the Access Point
and then to a power outlet and then click
Next
.