TRENDnet TEW-636APB Router Manual (Setup & Configuration)

There is no better technical help than having the manual of any given product. Fortunately, we are presenting router guide for TRENDnet TEW-636APB router. If you need help on topics like web panel access for management, router hard reset, parental control settings, band width allocation, changing your router IP or password from default, port forwarding, then reading this guide is a must.

Page 1 / 10
Quick Installation Guide
TEW-636APB
H/W: V1.0R
Downloaded from
www.Manualslib.com
manuals search engine
Page 2 / 10
Table of Contents
English
......................................................................................................
1
1
2
1. Before You Start
2. Hardware Installation
..........................................................................
.................................................................................
3. Configure the Access Point
...............................................................
Table of Contents
Version 03.24.2008
Troubleshooting
........................................................................................
6
3
Downloaded from
www.Manualslib.com
manuals search engine
Page 3 / 10
Installation Requirements
Application
Package Contents
1. Before You Start
English
1
?
?
?
Quick Installation Guide
?
?
TEW-636APB
User's Guide CD-ROM
AC Power Adapter (12V DC, 1A)
1 RJ-45 cable
?
?
A computer with a network adapter or wireless adapter properly installed
?
A network Switch or Hub with an available network LAN port
?
A RJ-45 network cable
?
TEW-621PC version 2 or TEW-623PI
version 2 (Optional)
Web Browser: Internet Explorer (5.5 or higher)
10/100Mbps
300Mbps
300Mbps Wireless N
HotSpot Access Point
(TEW-636APB)
Workstation with 300Mbps
Wireless N PCI Adapter
(TEW-623PI)
Notebook with 300Mbps
Wireless N PC Card
(TEW-621PC)
4-Port Gigabit Firewall Router
(TWG-BRF114
)
Workstation with 300Mbps
Wireless N USB Adapter
(TEW-624UB)
Cable/DSL
Modem
Internet
Downloaded from
www.Manualslib.com
manuals search engine
Page 4 / 10
2. Hardware Installation
English
2
Note:
Locate an optimum location for the Access Point. The best place for the
Access Point is usually at the center of your wireless network. Please connect
the computer configuring the TEW-636APB to the same switch/hub.
1.
Connect a RJ-45 cable from the
Switch/Hub to the
LAN
port of the
Access Point.
3.
Verify that the following panel lights
are on:
Power
and
WLAN
.
2.
Connect the AC Power Adapter to
the Access Point and then to a
power outlet.
Downloaded from
www.Manualslib.com
manuals search engine
Page 5 / 10
English
3
3. Configure the Access Point
1.
Open your web browser, type
http://SCXXXXXX,
in the Address
bar, and then press
Enter
.
XXXXXX represents the last 6
digits of the Mac Address.
You can
find the Mac Address on the bottom
of the router.
2.
Enter the User name and
Password, and then click
OK
.
User Name:
admin
Password:
password
3.
Click
System
and then click
Basic
Settings
.
Select your country or
domain from the drop down menu,
click Fixed IP Address, and type in
an IP address, Subnet Mask,
Gateway, and DNS to match your
current network settings. Click
Save
.
Note:
It is recommended that you configure the Access Point from a wired
computer.
Downloaded from
www.Manualslib.com
manuals search engine