Page 36 / 98 Scroll up to view Page 31 - 35
36
D-Link DAP-1360 User Manual
Section 3 - Configuration
Choose which Security Mode you want to use and
click
Next
to continue.
If you select
WEP
, choose the key type (ASCII or
HEX), the key size (64 or 128-bit), and enter the
wireless security password. Click
Next
to complete
the Setup Wizard.
If you select
WPA
or
WPA2
, enter the wireless
security password. Click
Next
to complete the Setup
Wizard.
Page 37 / 98
37
D-Link DAP-1360 User Manual
Section 3 - Configuration
The Wireless Setup Wizard is complete. Click
Finish
to reboot the device.
Page 38 / 98
38
D-Link DAP-1360 User Manual
Section 3 - Configuration
This Wizard is designed to assist you in your wireless network setup. It will guide you through step-by-step instructions
on how to set up your wireless network and how to make it secure.
Select
PIN
to use your
PIN
number from your
wireless device to connect to your network.
For
PBC
configuration, skip to the next page.
Click
Connect
to continue.
Start
WPS
on the wireless device you are adding to
you wireless network to complete the setup.
Add Wireless Device With WPS
Page 39 / 98
39
D-Link DAP-1360 User Manual
Section 3 - Configuration
Press down the
Push Button
on the wireless device
that you are adding to your network to complete the
setup.
Select
PBC
to use the Push Button Configuration in
order to connect to your network.
Click
Connect
to continue.
Page 40 / 98
40
D-Link DAP-1360 User Manual
Section 3 - Configuration
Manual Configuration
Wireless Settings
You may manually configure your DAP-1360 instead of running the setup wizard.
• Access Point mode - page 41
• Repeater mode - page 43
• Wireless Client mode - page 44
• Bridge mode - page 45
• Bridge with AP mode - page 46
• WISP Client Router mode - page 47
• WISP Repeater mode - page 47