Digitus DN-11004-O Router Manual (Setup & Configuration)

There is no better technical help than having the manual of any given product. Fortunately, we are presenting router guide for Digitus DN-11004-O router. If you need help on topics like web panel access for management, router hard reset, parental control settings, band width allocation, changing your router IP or password from default, port forwarding, then reading this guide is a must.

Page 1 / 52
DN-11004-O
4-Port 10/100M Internet
Broadband Router
with USB Printer server
User Guide
Page 2 / 52
2
FCC Statement
This device complies with FCC Rules Part 15. Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause
undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with manufacturer's instructions, may cause
harmful interference to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
1. Re-orient or relocate the receiving antenna.
2. Increase the separation between the equipment and receiver.
3. Connect the equipment to an outlet on a circuit different from that to which the receiver is
connected.
4. Consult the dealer or an experienced radio/TV technician for help.
WARNING! Any changes or modifications to this product not expressly approved by the
manufacturer could void any assurances of safety or performance and could result in violation of
Part 15 of the FCC Rules.
CE Declaration of conformity
This equipment complies with the requirements relating to electromagnetic compatibility, EN 55022 class
B for ITE and EN 50082-1. This meets the essential protection requirements of the European Council
Directive 89/336/EEC on the approximation of the laws of the Member States relating to electromagnetic
compatibility.
Trademarks
All company, brand, and product names are trademarks or registered trademarks of their respective
companies.
Page 3 / 52
3
Contents
1:Introduction
………………………………………
4
1.1 Features & Benefits
………………………
4
1.2 Technical Specification
……………………
5
1.3 Package Contents
…………………………
6
1.4 Glossary
……………………………………
6
2: Hardware Installation
…………………………
9
2.1 Product Description
……………………
9
2.1.1 Front Panel
……………………………
9
2.1.2 LEDs
…………………………………
9
2.1.3 Rear Panel
………………………………
10
2.2 Getting Started
………………………………
10
2.2.1 System Requirement
…………………
10
2.2.2 Before Installation
………………………
10
2.2.3 Setting Hardware Connection
…………
11
2.2.4 Configure your computer
………………
12
3: Using Configuration Menu
……………………
26
3.1 Basic Setup
…………………………………
27
3.2 DHCP Setting
………………………………
32
3.3 URL Access
………………………………
33
3.4 IP Access
……………………………………
34
3.5 Virtual Server
………………………………
35
3.6 DMZ Host
…………………………………
36
3.7 Device Administration
……………………
37
3.8 Status Monitor
………………………………
39
3.9 RIP
…………………………………………
39
3.10 Static Routing
………………………………
41
3.11 Dynamic DNS
……………………………
42
3.12 Special Application
………………………
43
3.13 Statistics
…………………………………
44
3.14 Security Setting
……………………………
45
3.15 Connection Log
……………………………
46
3.16 Time Setting
………………………………
47
3.17 UPnP
………………………………………
47
4: Install Printer Server
……………………………
48
5: Trouble-Shooting
………………………………
50
6: TCP/IP Port List for Internet Service
…………
51
Page 4 / 52
4
1. Introduction
This Broadband Router includes
4 10/100Mbps switch
ports and a
USB printer port
. It
provides a complete solution for
Internet surfing and office
resources sharing. This
4 Port Internet
Broadband Router
provides a simple, efficient, and cost-effective solution for
LAN/Internet
, especially
for
SOHO (Small Office/Home Office)
users to share the Internet resources simultaneously using one
ISP (Internet Service Provider)
account. It also supports a wide range of LAN-WAN connectivity media.
There are the
DSL
modem, cable modem, and Ethernet
10/100M
connections. Another feature is that the
4 Port Internet Broadband Router makes it easier and more economical to expand and segment your LAN.
As a result, you would never have a nightmare with IP address depletion problem.
In addition, this broadband router built-in
USB Printer Server
, allowing users can share networked
printer anytime. Besides, with firewall function, the 4 Port Internet Broadband Router can always protect
your LAN from outsider's break-ins and yet expose your local servers such as
Web Server, E-mail
Server, FTP server, for remote access by Virtual Server Mapping or DMZ setting.
1.1 Features & Benefits
• Conforms to
IEEE 802.3, IEEE 802.3u and IEEE 802.3x
standards
• Provides
1 10/100M WAN interface (RJ-45)
to connect with
DSL or cable modem
• Provides 4 10/100M switch LAN interfaces to connect your local area network
• Provides 1 USB 1.1 Printer Server Port to connect USB Printer
• Embedded with DHCP Server & Printer Server
• Supports
DDNS (Dynamic DNS) & Virtual Server
• Supports
PPPoE, PPTP Client
• Built-in
Network Address Translation Accelerator (NATA)
provides hardware NAT acceleration
• Firewall function, like
DoS Attack
prevented to protect your
PCs
from
outside intruders
• Configurable through any networked
PC’s web browser and Remote Management
• Simultaneously acts as either a
DHCP
server on the
LAN and a DHCP
client on the WAN
• By using virtual server, outside users will be able to access the internal
IP servers
via Internet.
• Administrators can block specific interior users’ Internet access
URL Blocking:
Prevent specific web sites form interior user’s access
• Supports
RIP I & II
, Static Routing
• Supports
PPTP, IPSec
pass through
Page 5 / 52
1.2 Technical Specification
Standards
IEEE 802.3 10BASE-T / IEEE 802.3u 100BASE-TX
USB 1.1
Protocol
CSMA/CD, TCP/IP, PPPoE, PPP, PPTP Client,
DHCP Client, DHCP Server, RIP I/RIP II
Topology
Star
Media
10BASE-T: UTP/STP Cat. 3, 4 or 5 100BASE-TX:
UTP/STP Cat. 5
No. of Port
WAN: 10/100M RJ-45 port x 1
LAN: 10/100M RJ-45 ports x 4
Printer Port: USB 1.1 port x 1
Reset: Reset Button x 1
NAT Accelerator Engine
Yes, 64 Entries
Flash/SDRAM
1MB/4MB
MAC Address
2K
Auto MDI/MDIX
Yes
LAN Switching Method
Store and forward
PPPoE/PPTP
Yes
Client/Fixed IP
DHCP Client
Yes
Port Triggering
Yes
DMZ Host
Yes
Routing
RIP I & II, Static routing
Firewall
DoS Attack prevented
URL Blocking
IP Port Filtering
VPN
PPTP, IPSec pass through
Management
Web-based, configuration, Remote Management
LED Indicator
Power, Link/Act
Environmental
Temperature Humidity
Temperature
Humidity
Operation
0
°C~
50
°C
10%~90%
Storage
-20
°C ~
70
°C
10%~90%
Dimension
165 ×87 ×30mm
Power Consumption
4W Max.
Power Supply
AC 9V, 0.6A
Conformance
FCC class B, CE mark class B
5