Cambridge Industries Group GPON G-93RG1 Router Manual (Setup & Configuration)

There is no better technical help than having the manual of any given product. Fortunately, we are presenting router guide for Cambridge Industries Group GPON G-93RG1 router. If you need help on topics like web panel access for management, router hard reset, parental control settings, band width allocation, changing your router IP or password from default, port forwarding, then reading this guide is a must.

Page 1 / 20
C
AMBRIDGE
Industries (Group) Co Ltd.
ONT G-25E
Hardware Installation Manual
August 2007
313-12201-02 Rev. B
www.cambridgeig.com
CIG
C
AMBRIDGE
Industries (Group) Co Ltd.
CIG
Page 2 / 20
ONT G-25E Hardware Installation Manual
Notice
The CIG name, the CIG logo, and all CIG product names are trademarks of Cambridge Industries
Group Co. Ltd (CIG). All other brand and product names are trademarks of their respective holders.
Specifications, products, and products names are subject to change without notice.
This document may not be reproduced in whole or in part without the express written permission of
CIG. This document contains confidential, proprietary information belonging to CIG, and may not be
used or disclosed except in accordance with applicable agreements.
Performance figures and data quoted in this document are typical and must be specifically confirmed
in writing by CIG before they become applicable to any particular order or contract. The company
reserves the right to make alterations or amendments to the detailed specification at its discretion.
Copyright 2006, 2007 Cambridge Industries Group Co. Ltd. All rights reserved.
Document History
Part Number
Summary of Changes
-01, Rev. A
Initial release
-02, Rev. B
Bug fixing
313-12201-02 Rev. B: August 2007
Cambridge Industries Group Co. Ltd
I
Page 3 / 20
ONT G-25E Hardware Installation Manual
Product Information
To learn more about this product or CIG, contact your local sales representative or contact CIG
Marketing at:
Address:
Hong Kong
25th Floor, Jardine House, 1 Connaught Place
Hong Kong, PRC
Phone: +852 2827 1778
Shanghai
Building 4, 3/F, Block D
889 Yishan Road
Shanghai 200233, China
Phone: +86 21 6121 3299
Fax: +86 21 6121 3277
Email:
info@cambridgeig.com
Web URL:
Ordering
To order CIG components and documents, contact your local sales representative, or contact
CIG at the address, telephone, fax number or e-mail address listed above.
313-12201-02 Rev. B: August 2007
Cambridge Industries Group Co. Ltd
II
Page 4 / 20
ONT G-25E Hardware Installation Manual
Technical Support
CIG offers technical support 24 hours a day, 7 days a week. To contact the CIG technical
assistance center, use one of the following methods:
NOTE:
For urgent support requests, please contact CIG by telephone. Delays caused by e-
mail may result in a longer response time.
Telephone:
+86 21 6121 3299
Email:
support@cambridgeig.com
When you contact CIG, please have the following information ready:
z
Product model name, part number, and serial number
z
List of system hardware and software, including version
z
Diagnostic error messages, if any
z
Details about recent configuration changes, if applicable
313-12201-02 Rev. B: August 2007
Cambridge Industries Group Co. Ltd
III
Page 5 / 20
ONT G-25E Hardware Installation Manual
Compliance with CE Marking Certification (Class B)
The equipment was tested and found to comply with
EN 60950-1:2001
. The equipment is
tested and only used with power adaptor included in the package.
The equipment complies with the requirements according to the following standard:
ETSI EN 300 386 V1.3.3: 2005
Electromagnetic compatibility and radio spectrum Matters
(ERM);
Telecommunication
network
equipment;
Electromagnetic
compatibility
(EMC)
requirements
EN 61000-6-1:2001
: Electromagnetic compatibility (EMC) — Part 6-1: Generic standards
Immunity for residential, commercial and light-industrial environments.
EN 61000-6-3:2001
: Electromagnetic compatibility (EMC) — Part 6-3: Generic standards
Emission standard for residential, commercial and light-industrial environments, which refers to
the following basic standards:
EN 55 022+A1:2000+A2:2003
Information technology equipment
Radio disturbance
characteristics Limits and methods of measurement.
EN 61000-4-2: 1995/+A1:1998/+A2:2001
: Electromagnetic Compatibility (EMC) – Part 4:
testing and measurement techniques – section 2: electrostatic discharge immunity test
EN 61000-4-3: 2002/+A1:2002
: Electromagnetic Compatibility (EMC) – Part 4: testing and
measurement techniques – section 3: radiated, radio frequency, electromagnetic field immunity
test
EN 61000-4-4: 2004
: Electromagnetic Compatibility (EMC) – Part 4: testing and measurement
techniques – section 4: electric fast transient/burst immunity test
EN 61000-4-5: 1995/+A1: 2001
: Electromagnetic Compatibility (EMC) – Part 4: testing and
measurement techniques – section 5: surge immunity test
EN 61000-4-6
: 1996/+A1:2001: Electromagnetic Compatibility (EMC) – Part 4: testing and
measurement techniques – section 6: immunity to conducted disturbance, induced by radio
frequency field.
EN 61000-4-11:2004
: Electromagnetic Compatibility (EMC) – Part 4: testing and
measurement techniques – section 11: voltage dips, short interruption and voltage variations
immunity test
EN 61000-3-2:2000/+A2:2005
: Limits for harmonic current emissions (equipment input
current <=16A per phase)
EN 61000-3-3:1995/+A1:2001/+A2:2005
: Limitation of voltage fluctuations and flicker in
low-voltage supply systems for equipment with rated current <=16A
313-12201-02 Rev. B: August 2007
Cambridge Industries Group Co. Ltd
IV